|
CISolar
Supplies Co. POBox 2805 Chino, CA 91710 PH: (909) 628-6440 FX: (909) 628-6440 E-Mail:jclothi@attglobal.net |
|
Returnto CI Division
>>>>>
|
|
Telecom |
|
|
|
|
|
| Medium-Sized Backup
Solar Power Kits |
|
| The following power
systems
will allow a home to survive a temporary electric power blackout.
Batteries
will be kept charged by solar energy. If utility power fails, then a
DC-to-AC
inverter will automatically operate selected appliances (usually
refrigerator
and lights). In the normal situation, when utility power is available,
excess
solar power will assist in reducing the electric bill (slows the
electric
meter). Even though the electricity metering may be
reduced
by only 10%, this may eliminate the costly "over baseline"
billing. There are two ways to connect the systems: One method is to install a new, permanent wire run from the solar system to the the critical appliances (see illustration); this will be the most attractive installation. A simpler method is to connect the appliances via a portable cord; this way, no electrical inspection is involved. |
|
| This power system has a
two-position
switch that the homeowner uses to select either of two automatic modes: 1. Utility Primary - - In this mode, the appliances are normallyon utility power. Appliances will transfer to battery backup if utility fails. 2. Solar Primary - - In this mode, the appliances are normallyon solar and battery power. Appliances will transfer to utility if batteriesare low. Saves on utility bill. Note: For larger power systems, 1000 to 5000Watts, see the Utility Grid-Tiepower catalog. These larger systems will provide up to 100% of home powerneeds from solar or wind energy. |
|
120VAC LIGHTING KIT FOR MEDIUM HOME (AUTO CHANGEOVER) - - 200W This kit generates 200 Watts of solar power and will automaticallyswitch over to backup power, when utility power fails. The complete kit includesfour Solarex solar panels (53Watts ea), battery charge regulator, and DC/ACinverter. Can operate lamps, a small TV, microwave oven, and refrigerator. Or additional lights. Forevery-day use, provides 4 hrs of light and TV every night, plus refrigerator (peak load 1500Watts, total). Batteries will provide power for sunless days. Will generate 300kWhrs per year, which can reduce electric bill by 5%. Kit includes thefollowing: Required Components
Optional Components (Obtain Locally)
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Model LK/CI-AC120-212 Kit Price: $2631.80 ea |
120VAC LIGHTING KIT FOR MEDIUM HOME (AUTO CHANGEOVER) - - 400W This kit generates 400 Watts and will automatically switch over to backup power, when utility power fails. The complete kit includes eight Solarex solar panels (53Watts ea), battery charge regulator, and DC/AC inverter. Can operate lights, a small TV, microwave oven, and refrigerator. Or additional lights. Forevery-day use, provides 8 hrs of light and TV every night, plus refrigerator (peak load 1500Watts, total). Batteries will provide power for sunless days. Will generate 600kWhrs per year, which can reduce electric bill by 10%. Kit includes thefollowing: Required Components
Optional Components
|
|||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Model LK/CI-AC120-412
Kit
Price:
|
| Installation: These kits include
installation
instructions. They may be installed by the homeowner or his selected
contractor.
Typical installation labor cost is $500 to $1500. The installer
provides
wire and common hardwire. If done by homeowner, his work should be
safety-checked
by a journeyman electrician. In any case, an engineer from CI will
inspect
the installation before turn on. |
![]() |
| These systsems include all the
major components needed for a compete installation. The modules are
high performance BP Solar SX3175B or SC3190B with quick connect (MC)
wires, interal bypass diodes and attractive robust dark anodized
aluminum frame. The modules are covered by a 25 year output warranty.
The flush mounting hardware included is fabricated with stainless steel
hardware and anodized aluminum, engineered and designed for rapid,
durable installation. (Other mounts also available). The inverters in
these systems are the Xantrax XW Series with their MPPT60 charge
contollers.
All switchgear and ground fault protection for the array are included
and listed to UL specifications. Includes approved system performance
meter. The inverter assembly is rated NEMA1 (INdoor) and is desigbed to
mount vertically on a wall. The batteries are valve regulated (sealed)
lead-acid and come with an enclosed battery shelf Installation cost
will vary depending on the size of the system., type of roof and
location. |
| Back-up Systems: Xantrex XW Inverters and
BP Modules |
![]() |
Inquiries to: Mr John Clothier, Sales EngineeringMgr jclothi@attglobal.net
CI Solar
Supplies
Co POBox 2805 Chino, CA 91710 USA
Phone
1 800 2SOLAR8 or(909) 628-6440