Battery Chargers CI Solar Supplies Co.
Online Catalog
Power Sonic Battery Chargers
Wall-mount, plug-in with automatic electronic regulation of full & float charging voltages and protected against short circuit and reverse polarity. Input 120VAC 
Model No. Voltage  Current (A)  Bat Cap (AH)  Dimensions HxWxD"  Ship Wt. (lbs)  Price  Qty 2-5 each Qty 6-up each
BC/PS-C6250A  6  0.3  1-6.5  2.0 x 2.0 x 1.9  1  $46.00  39.10 34.50
BC/PS-C61000A  6  1  4.5-12  2.8 x 2.8 x 3.8  2  $47.50  40.40 35.65
BC/PS-C64000A  6  4  10-60  5.9 x 5.7 x 3.3  4  $141.75  120.50 106.30
BC/PS-C12250A  12  0.3  1-6.5  2.2 x 2.0 x 1.9  1  $45.00  38.25 33.75
BC/PS-C12800A  12  0.75  4-17  3.7 x 2.6 x 2.6  2  $46.25  39.30 34.70
BC/PS-C124000A  12  4 ** 10-60  5.9 x 5.7 x 3.3  4  $141.75  120.50 106.30
**C122000A, C241000A and C124000A can be switched to accept 115 VAC or 230 VAC input (47-63Hz) allowing usage  both here and abroad.  

IOTA Engineering Battery Charger/Converters
The DLS series battery charger/power supply converts 120 volts nominal A.C. to 13.6 volts D.C.  As a power supply, its tightly controlled regulation allows the user to operate any 12 volt nominal D.C. load up to the converter's rated output current.  As a battery charger, the converter will maintain the battery, delivering its full-rated current when the battery capacity falls sufficiently low.  The voltage of the converter is set to deliver its maximum current for the necessary period of time that minimizes undue stress to the battery caused by heating of its cells.  This helps to ensure the longest possible life of the battery.  Over time, as the battery nears its full capacity, the converter will float-charge the battery to prevent self-discharge of its cells.
Protection Features
The DLS series battery charger/power supply is designed with high quality components that help to ensure years of continuous, trouble-free use.
Protection features include:
1) Reverse Battery Polarity Protection
2) Brown-Out Input Protection
3) Over-Current Protection - cycle by cycle peak limiting as well as rated current limiting to maximize the life of the converter.
4) Over-Temperature Protection
In addition, it is designed with a unique "proportional" fan control circuit.  Fan speed is directly proportional to the converter's internal ambient temperature.  This enables the fan to turn on and off very slowly, minimizing unwanted fan starting noise.
Charge Controller Options
Two-Step Voltage Jack. The two-step voltage jack located on the top of the DLS-75 on the end closest to the fans, allows switching from a long-term float voltage of 13.6vdc up to 14.2vdc. When the included dual voltage plug is inserted in the jack, the voltage rises to 14.2vdc for occasional fast charging.  When the plug is removed, the voltage drops to 13.6vdc to reduce battery water loss.
The DLS-75 has the option of a built-in IQ smart controller.  The microprocessor-controlled IQ turns the DLS charger into an automatic 3-stage "smart" charger, giving the user the benefit of bulk, absorption, and float stage charging.  This increases the charging capacity of the DLS charger, decreases charge times, and insures proper and safe battery charging without ever over-charging. The IQ smart controller is activated when the plug is NOT in the jack.  When the plug is inserted, the charger is in the 14.2vdc quick-charge state.
Model No.
 		Input Volts
 		Frequency
 		Watts
(draw)
 		Output Amps
 		Output Volts
 		Dimensions
(WxHxL)
 		Price
 		Qty 2-5 each
 		Qty 6-up each
DLS15
 96-140
 40-70Hz
 250
 15
 13.4-14.0@Full Load
 6.75"x3.75"x7"
 $

DLS30
 96-140
 40-70Hz
 500
 30
 13.4-14.0@Full Load
 6.75"x3.75"x7"
 $182.00
 154.70
 136.50
DLS45
 96-140
 40-70Hz
 750
 45
 13.4-14.0@Full Load
 6.75"x3.75"x7"
 $194.00
 164.90
 145.50
DLS55
 96-140
 40-70Hz
 900
 55
 13.4-14.0@Full Load
 6.75"x3.75"x10"
 $

DLS75
 96-140
 40-70Hz
 1300
 75
 13.4-14.0@Full Load
 6.75"x3.2"x13"
 $468.00
 397.80
 351.00
DLS24-250





$356.00
 302.60
 267.00
DLS24-500





$600.00
 510.00
 450.00

IOTA Engineering IQ Smart Controller
The IQ Smart Controller offers automatic charging control for the DLS power converters/chargers to provide longer and safer use of your system's battery. The IQ Controller is compatible with any DLS model, and is covered under Two-Year Warranty. The IQ Controller allows the DLS charger to operate as an automatic 3-stage "smart charger". This gives the benefit of Bulk, Absorption, and Float stage charging, increasing the charging capacity of the DLS charger and decreasing charge times, insuring proper and safe battery charging and minimizing over-charging. This "smart" technology monitors the battery at all times. If the DLS voltage remains in the long term float stage for more than 7 days, the IQwill automatically deliver a boost charge for a predetermined time, then automatically return to the normal float stage. DLS power converters can be ordered with the IQ Controller option internally integrated into the unit.
Bulk Charge
The batteries are charged from the full rated output of the DLS charger. During this stage, the batteries are recharged quickly to reduce charge times.

Absorption Charge
 The batteries are then held in the absorption stage for a controlled period, insuring a full and complete charge. During this stage, the battery cells are equalized to 14.2vdc (for 12V systems) for increased capacity.
Float Charge
During the float stage, the DLS charge voltage is reduced. This minimizes gassing, while maintaining a full charge. If the battery voltage drops below 12.6vdc (for 12V systems), the IQ Controller will restart at the bulk charge stage and repeat this cycle.
Weekly Equalization
 If the batteries have not received a "smart charge" during a 7 day period, the IQ Controller will switch the DLS charger into a pre-programmed, equalization stage to top off the batteries. This ensures full batteries all of the time without over-charging.







 
Model No.
 Description
 Price
 Qty 2-5 each
 Qty 6-up each
IQ-3
 3 Stage Smart Charger (wired connections) $35.00
 29.75
 26.25
IQ-4
 3 Stage Smart Charger (w/ modular pnone conn)
 $


IOTA Engineering ITS Transfer Switches
The ITS Series Transfer Switches from IOTA provide automatic power supply switching for a variety of applications. Switch between AC powercords, onboard generators, onboard inverters, or all three. Switching is automatic. The ITS senses the presence of the available supplies and automatically selects the proper one, providing safe and appropriate levels of power at all times. And the ITS comes in a variety of models for use in a wide range of power applications. Models available include Relay-Based (R) and Contactor-Based (C) switches, and also units designed for special applications. In addition, all ITS Transfer Switches are backed by our standard two-year warranty.
Model No.
 Description
 Price
 Qty 2-5 each
 Qty 6-up each
ITS-30R
 30 amp Transfer Switch
 $63.00
 53.55
 47.25
ITS-50R
 50 amp Transfer Switch
 $156.00
 132.60
 117.00
ITS-75C
$

ITS-100R
$

 

Todd Engineering Power Source Battery Chargers
Lightweight, compact, quiet, cool running and easy to install. These units can operate on 120V, 60Hz utility or generator power. They have dual voltage settings, one for cycling and one for float. Specify output voltage. "D" models are field selectable for 14.0 or 14.8V. "A" models are adjustable by an external potentiometer between 13.5V and 16.5V. LED indicators for normal operation or fault condition. Accessories include the OS2 remote manual voltage selector switch and the ADV2 which automatically switches the voltage from the high to the low setting after the battery has charged to the high voltage for 4 hours. Limited lifetime warranty with return of registration (One year limited otherwise).
No longer available.  Listed for information use only.  Replaced by IOTA equivalents above.
Model No. Fan  Description  Dimensions HxWxL"  Ship Wt. (lbs)  Price  Qty 2-5 each Qty 6-up each
BC/TD-PC15  No  Battery Charger, 12V 15A  4 x 7.3 x 6  6 


BC/TD-PC30B Yes  Battery Charger, 12V 30A  2.8 x 6.0 x 9.7  6 


BC/TD-PC30-24  No  Battery Charger, 24V 30A  4 x 7.3 x 14.3  11 


BC/TD-PC40B  Yes  Battery Charger, 12V 40A  2.8 x 6.0 x 9.7  6 


BC/TD-PC45B  Yes  Battery Charger, 12V 45A  2.8 x 6.0 x 9.7  6 


BC/TD-PC55B  Yes  Battery Charger, 12V 55A  3.5 x 6.2 x 9.9  7 


BC/TD-PC75D  Yes  Battery Charger, 12V 75A  4 x 7.3 x 15.5  12 


BC/TD-PC75A  Yes  Battery Charger, 12V 75A  4 x 7.3 x 15.5  12 


BC/TD-OD2  Manual Dual Voltage Selector Switch w/6' wire harness 


BC/TD-ADV-2  Add-on Two Stage Charger Module for dual voltage models 


                                  
CI "Brownout" Battery Charger Kits
These are simple, unregulated transformer rectifiers that can be used as battery chargers. They are  intended for operation from utility or generator power, where a wide range of input voltages can be expected. Build it yourself. Use this rectifier to add a charger to DC-to-AC  inverter and battery bank, thus forming a standby power system. Also, see Automatic Transfer Relay in another catalog  section. These kits consists (only) of heavy-duty transformer, rectifier, and ammeter. Operate nominally from 115 or 230 Vac, 47-65 Hz (or 400Hz), but transformer taps allow connection to a much wider range of voltages. Higher power kits available. USA components.
Model No. Description  Ship Wt. (lbs)  Price  Qty 2-5 each Qty 6-up each
BC/CI-KIT 12/4 Rectifier Kit, 12V @ 4Adc or
24V@ 2Adc		 12  $93.00  79.00 69.50
BC/CI-KIT 12/12 Rectifier Kit, 12V @ 12Adc or
24V@ 6dc		 15 110.00 93.50 82.50

CI Solar Supplies Co, PO Box 2805, Chino, CA 91710 (909) 628-6440 jclothi@attglobal.net



 
 

















CI Solar Supplies Co, PO Box 2805, Chino, CA 91710 (909) 628-6440 jclothi@attglobal.net