| DC-to-AC
Inverters (Continued) |
CI
Solar Supplies Co.
Online Catalog |
||||||
|
Returnto CI Division
>>>>>
|
|
Telecom |
|
|
|
|
|
| Manufacturer |
Application |
|||||||||||||||||||||||||||||||||||||||
| Xantrex/Schneider
Inverters (formerly Trace) |
|
|||||||||||||||||||||||||||||||||||||||
| Beacon Power |
|
|||||||||||||||||||||||||||||||||||||||
| Enphase |
|
|||||||||||||||||||||||||||||||||||||||
| Fronius |
|
|||||||||||||||||||||||||||||||||||||||
| Morningstar |
|
|||||||||||||||||||||||||||||||||||||||
| Outback |
|
|||||||||||||||||||||||||||||||||||||||
| SMA |
|
|||||||||||||||||||||||||||||||||||||||
| Solectria |
|
|||||||||||||||||||||||||||||||||||||||
| Exceltech |
|
|||||||||||||||||||||||||||||||||||||||
| Powerstar Upg/Pow200 (Discontinued) |
|
|||||||||||||||||||||||||||||||||||||||
![]() ![]() |
Enphase
Energy Inverter 175W models efficiency rating 94.5% and 200W models efficiency rating 95%. One inverter per solar module. MC connector for DC. Specialized parallel connectors for AC. One to 16 inverters [er ndracj corcito dfpr 240V (24 for 208V).EMU (Energy Management Unit) is an indoor moujnted device that accepts data via powerline (ac wiring) from all the inverters in the system (180 max per EMU). It includes a display and an internet interface. The internet connection is through ethernet cable to a router. Data is displayed and saved via enlighten software through the Enphase website. One year of Enlighten service is included with the purchase of the EMU. Install Kit - A cap is provided for the unused end of the AC connector and a PI/gtail harness for the string output of the AC. The 3 - phase version to the PI/gtail distributs across the 3 phases. Each set of inverters ( up to the maximum allowed, see above) is then wired into an AC source center through a 15A breaker.A weatherproof 2P, 15A switch could be used on the roof as a disconnect for each string of if desired or required. Advantages are: No string design required, no high-voltage DC wiring. Higher power availability when inverter fails. Web based per-module performance monitoring and no need for specilal location of the inverter. 15 year warranty. |
|||||||
| Model
Number |
Description |
Dimensions
W x H x D"
|
Weight
Lbs. |
List
Price |
Price
Each |
CI Price |
Qty
2-5 Each |
Qty 6 & up Each |
| PI/EN- M200-32-240-SO1 |
Microinverter
200W Grid-Tie 32VAC in, 240VAC out w/MC non-locking |
10.5 x
5.5 x 1.5 |
4.0 |
$190.95 | ||||
| PI/EN- M200-32-240-SO2 |
Microinverter 200W Grid-Tie 32VAC in, 240VAC out w/MC locking | 10.5 x 5.5 x 1.5 | 4.0 |
$190.95 | ||||
| PI/EN- M200-32-208-SO1 |
Microinverter 200W Grid-Tie 32VAC in, 240VAC out w/MC non-locking | 10.5 x 5.5 x 1.5 | 4.0 |
$190.95 | ||||
| PI/EN- M200-32-208-SO2 |
Microinverter 200W Grid-Tie 32VAC in, 240VAC out w/MC locking | 10.5 x 5.5 x 1.5 | 4.0 |
$190.95 | ||||
| PI/EN- M175-24-240-S |
Microinverter
Grid-Tied 175, 24V nom, DC Input, 240VAC Output |
10.5 x 5.5 x 1.5 | 4.0 | $190.95 | ||||
| PI/EN- M175-24-240-S |
Microinverter Grid-Tied 175, 24V nom, DC Input, 240VAC Output | 10.5 x 5.5 x 1.5 | 4.0 | $190.95 | ||||
| PI/EN- EMU+1YR |
Enphase
Monitor w/ 1 year Enlighten Service |
10.5 x 5.5 x 1.5 | 4.0 | |||||
| PI/EN- K240 |
Enphase
Wiring Kit for 240V Output Stdring (Cap, PI/gtail) |
10.5 x 5.5 x 1.5 | 4.0 | |||||
| PI/EN- ENLO4-R1 |
4
years additional Enlighten Service |
10.5 x 5.5 x 1.5 | 4.0 | |||||
![]() |
Fronius
Inverter Fronius IG Inverters 2000-5100W. Wide input voltage range allows greater system design flexibility. Mounting bracket makes installation simple and fast. MIX Concept allows your system to output more energy under part load conditons. Expansion slots in the inverter allow to easily upgrade inverter with complete data communication solution. 95.2% efficiency. Fronius IG PLUS Inverters. Higher efficiencies (95-96%), field configurable AC voltages (208,240,277), DC disconnect with 6 circuit aray inputs included. Higher DC input range of 230-600V. Intelligent thermal management maximizes energy yeild. Large LCD display standard on all models. Integrated DC/AC disconnects reduce installation time and cost. 10 year warranty. |
||||||
| Model
Number |
Continuous
Power (W) |
Dimentions
L x w x D" |
Weight Lbs. |
List
Price Each |
CI Price |
Qty 2-5 Each |
Qty
6 & up Each |
| PI//FR- IG2000 |
2000 |
18.5 x
16.5 x 8.8 |
26 |
$2035.00 |
$1729.75 |
$1526.25 |
|
| PI//FR- IG3000 |
2700 |
18.5 x 16.5 x 8.8 | 26 |
$ |
$ |
$ |
|
| PI//FR- IG4000 |
4000 |
28.4 x
16.5 x 8.8 |
42 |
$2398.00 |
$2038.30 |
$1798.50 |
|
| PI//FR- IG5100 |
5100 |
28.4 x 16.5 x 8.8 | 42 |
$3159.00 |
$2685.15 |
$2369.25 |
|
| PI//FR- IGPLUS3.0-1UNI |
3000 |
24.8 x
17.1 x 9.6 |
31 |
$2350.00 |
$1997.50 |
$1762.50 |
|
| PI//FR- IGPLUS3.8-1UNI |
3800 |
24.8 x 17.1 x 9.6 | 31 |
$2780.00 |
$2360.00 |
$2085.00 |
|
| PI//FR- IGPLUS5.0-1UNI |
5000 |
36.4 x
17.1 x 9.6 |
57 |
$3883.67 |
$3301.12 |
$2912.785 |
|
| PI//FR- IGPLUS6.0-1UNI |
6000 |
36.4 x 17.1 x 9.6 | 57 |
$4015.00 |
$3412.75 |
$3011.25 |
|
| PI/FR- IGPLUS7.5-1UNI |
7500 |
36.4 x 17.1 x 9.6 | 57 |
$4645.00 |
$3948.25 |
$3483.75 |
|
| PI/FR- IGPLUS10.0-1UNI |
9995 |
48.1 x
17.1 x 9.6 |
82 |
$ |
$ |
$ |
|
| PI/FR- IGPLUS11.4-1UNI |
11,400 |
48.1 x 17.1 x 9.6 | 82 |
$7020.00 |
$5967.00 |
$5265.00 |
|
| PI/FR- IGPLUS11.4-3DELTA |
11,400 |
48.1 x 17.1 x 9.6 | 82 |
$7020.00 |
$5967.00 |
5265.00$ |
|
| PI/FR- IGPLUS12.0-3-1WY |
12,000 |
48.1 x 17.1 x 9.6 | 82 |
$7215.00 |
$6132.75 |
$5411.25 |
|
| PI/FR- DATA-L-CARD |
Data
Logger card
supports Fronius IG inverter |
||||||
![]() |
Morningstar
Power Inverter 300 watt pure sine wave inverter (12V DC input). Up to 600 watt surge capability. Provides quality AC equivalent to grid power. High efficiency will reduce heating and make more solar engergy available for powering toads. Low self-consumption; automatically powersw down to stand-by mode during no load conditions. Exetensive electronis protections. 2-year warranty. |
|||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||
![]() |
Outback Power
Systems Outback Power has developed customizable, attractive integrated solutions for renewable energy systems. The components can be purchased inividually as required, but are all designed to be assembled into a complete integrated system. These systems can be assembled for you, prior to deleivery to your site. The FLEXware product line is fabricated of powder coated aluminum with stainless steel hardware. The FLEXware 1000AC & FLEXware1000DC are designed to work with up to 4 of the Outback FX series Inverters and up to 4 MX60 charge Controllors. The FLEXware 1000AC includes ground bus bar and 2 DIN mounting brackets with space for up to 32 DIN type breakers (not included) order a input/output/bypass breaker assembly per inverter voltage configuration requirements. Space for a transformer is also available. The FLEXware 1000DC includes a 500A/50mV shunt, negative/ground terminal bus and an isolated positive terminal bus. The FLEXware 1000 DC also provides enclosure mounting space for ground fault protection, up to 4 MX60 PV charge controllers and DC load breakers. The FLEXware 500AC and FLEXware 500DC are designed to work with one or two OutBack FX series inverters and up to 2 of the MX60 charge controllers. The FLEXware 500AC includes ground bus bar, breaker labels space for a input/output/bypass switch for 2 inverters, AC input breakers. The FLEXware 500DC comes with a 500A/50mV shunt, battery negative bus, positive bus, breaker labels. One DC breaker is used for each inverter. Positions in the enclosure allow for mounting MX60 PV and Battery breakers, array ground fault protection (DCGFP2) and breakers for DC loads. The FLEXware 250 is a DC and/or breaker enclosure for one FX Series Inverter/Charger. It includes a Ground bus bar, DC breaker handle guard, braker mounting hardware and enclosure mounting hardware. Utilizing an extremely compact design and unique mounting features, one or two FLEXware 250 enclosures can be mounted on each end of a single FX Series Inverter/Charger. The FLEXware 250 enclosure is constructerd of powder-coated aluminum and has been ETL listed. It provides breaker spaces for battery, PV aray or PV GFP breakers and mounting locations for AC GFCI outlet, AC breakers and Input-Output-Bypass Assemly. Holds up to eight 1 to 80 Amp, one 175 or 250 Amp panel mount breaker and aq GFCJI AC outlet (not included). It does not use the DCA or ACA for connection to an FX Series Inverter/Charger or a DFC current shunt. The FLEXware Mmounting Plate and hardware uesed for mounting onr or two FX series inverters and FLEXware 500AC and 500DC enclosures. 2 Mounting plates are used for FLEXware 1000 assemblies of up to 4 inverters and the FLEXware 1000AC and 1000DC. |
|||||||||||||||||||||||||||||||||||||
| |
|
|||||||||||||||||||||||||||||||||||||
![]() |
SMA InvertersSMA America offers a wide selection of reliable and efficient inverters.For residential grid-tied solar power systems, Solar Depot carries models ranging from 3000 to 7000 watts. All of these inverters have a LCD monitoring system mounted on the front of the inverter. Real time power production, operating voltage and cumulative production are displayed. The US Series inverters automatically sense the site utility voltage and can be configured with internal jumper settings to work with a 208, 240, or 277 VAC. The inverters incorporate a cast aluminum housing to separate the control and power electronics. The power electronics compartment integrates SMA's new OptiCool TM airflow technology where cool air is drawn in through the bottom of the enclosure by convection, drawn around the power electronics where the air absorbs heat and is the released through a side vent. When required, this process is assisted by a temperature controlled fan. The US Series include an integrated fused series string combiner and a load break rated DC disconnect. These US model number inverters also come with a 10 year warranty |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
![]() |
Solectria
Inverters Solectria Renewables PVI Residential Grid-Tied Inverters are available in 3000 ( 2900 ), 4000 ( 3900 ), 5000 ( 4900 ) and 5300 models. They all have CEC efficiency ratings of 96% at 240 VAC and include an integrated fused DC (Array) input board for 3 or 4 circuits anda DC disconnect. Field configurable for 208 VAC. Inclufed free PC software and both RS232 and RS485 communication ports. 10 year warranty. Made in Taiwan. |
|||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||