Components for
Solar Pools
&
Spas |
CI Solar Supplies Co.
On-Line Catalog |
In this catalog section:
Solar Collectors
Pool Controls
Pool Timers
AC Pumps
DC Pumps
Pool Filter
|
Gas-Fired Heaters
Pool Cleaners
Valves
Flowmeters
Thermometers,
Heat Exchangers
|
|
The trend in pool operation
is toward more efficient
filtration, lower pump power consumption, use of solar heating, and
tighter
control of pool chemistry. All directed toward energy conservation.
Heating. Addition of solar heat collectors is the single
most important measure that will reduce heating cost. In the lower
latitudes,
uncovered polymer/rubber collectors are ideal; they will quickly pay
for
themselves in terms of reduced energy costs. In higher latitudes,
covered
collectors are more suitable.
Filtration. It is now feasible to operate pool filtration
systems
on solar energy. Some ideas are presented below.
|
|
Solar Collectors
AQUASOL solar collectors for
heating pool
and spas are made of polypropylene copolymer. UV inhibitors and
antioxidants
are integrated into the copolymer to make the panels resistant to
ultraviolet
rays of the sun and to oxidation due to pool chemicals and
environmental
factors. The panels are installed by use of a set of UVprotected
hold-down
straps and butterfly brackets. The manifolds or headers are 1.5" I.D.,
1.9"
O.D. and 51" long. The headers of adjacent panels are joined together
using
the two 4" EPDNM couplers and four stainless steel bandseal clamps
provided
in the panel kits. Also included in the panel kits are two butterfly
brackets
for the hold-down strap and an additional SS clamp with an outlet
header
bracket. Up to 12 panels may be installed with a single feed and
return.
A system kit provides the adapters for the feed and return, along with
two
7" couplers, a vacuum breaker, an end cap and two butterfly strap
holddown
brackets and four strap hold down clamps for the hold-down strap. The
hold-down
strap is sold seperately in 54' & 107' lengths. the 107' is enough
for
12 collectors. If the panels are installed in more than one row. then
each
row would require a system kit. Max fluid pressure 95 psi @ 80F, max
operation
pressure 35 psi W., 140F. Pressure drop 0.09 - 0.13 PSI within (he flow
range.
Flow rates: max 10 gpm, ruin 2.5 gpm, recommended 0. 1 gpm/sq. ft of
collector
area. 10 year limited warranty. Leaky risers may be repaired on site by
using
special repair plugs which preserve the appearance of the panel. |
|
Model No.
|
Description
|
Price
|
Qty 2-5ea.
|
Qty 6-up ea.
|
|
CL/SD-AQ48
|
Pool
Collector
4 x 12 with 1.5" Header
|
$192.79
|
163.87
|
144.59
|
|
CL/SD-AQ48-2
|
Pool
Collector
4 x 12 with 2" Header
|
$231.79
|
197.02
|
173.84
|
|
CL/SD-AQ40
|
Pool
Collector
4 x 10 with 1.5" Header
|
$168.21
|
142.98
|
126.16
|
|
CL/SD-AQ40-2
|
Pool
Collector
4 x 10 with 2" Header
|
$207.14
|
176.07
|
155.36
|
|
CL/SD-AQ32
|
Pool
Collector
4 x 8 with1.5" Header
|
$157.50
|
133.88
|
118.13
|
|
CL/SD-AQ32-2
|
Pool
Collector
4 x 8 with 2" Header
|
$192.86
|
163.93
|
144.65
|
|
CL/SI-12034
|
Panel Kit:
1.5"
|
$13.57
|
11.53
|
10.18
|
|
CL/SI-12043
|
System Kic
1.5"
|
$42.86
|
36.43
|
32.15
|
|
CL/SI-12034-2
|
Panel Kit: 2"
|
$15.71
|
13.35
|
11.78
|
|
CL/SI-12043-2
|
System Kit: 2"
|
$51.43
|
43.72
|
38.57
|
|
CL/SI-10035
|
Hold Down
Strap
54'
|
$27.14
|
23.07
|
20.36
|
|
CL/SI-10035-2
|
Hold Down
Strap
107'
|
$50.00
|
42.50
|
37.50
|
|
Nylon Strap & Collector
Spare Parts
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CL/CW-N1106-1
|
Nylon Hold Down Strap 150'
|
$35.71
|
30.35
|
26.78
|
|
CL/CW-N1106
|
Nylon Hold Down Strap 300'
|
$60.00
|
51.00
|
45.00
|
|
CL/SD-16007-3
|
Nylon Hold Down Strap 300'
|
$60.00
|
51.00
|
45.00
|
|
CL/SD-30150
|
Strap Hold Down Butterfly
Plastic
|
$2.14
|
1.82
|
1.61
|
|
CL/Sl-50006
|
Strap Hold Down Butterfly
Metal
|
$1.43
|
1.22
|
1.07
|
|
CL/SD-30164
|
Repair Plugs I 0/pk
|
$5.43
|
4.62
|
4.07
|
|
CL/SD-60001-2
|
System Conctr Hose 7" L 1. 5
"
D
|
$3.15
|
2.68
|
2.36
|
|
CL/SD-60002-2
|
System Conctr Hose 7" L 2" D
|
$8.21
|
6.98
|
6.16
|
|
CL/SI-10003
|
Vac Relief 1.5"
|
$17.14
|
14.57
|
12.86
|
|
CL/SI-10003-2
|
Vac Relief 2"
|
$21.43
|
18.22
|
16.07
|
|
CL/SI-10011
|
Strap Hold Down Clamp
|
$3.57
|
3.03
|
2.68
|
|
CL/SI-30089
|
Barbed Fitting Pipe Adaptor
1.5"
|
$5.36
|
4.56
|
4.02
|
|
CL/SI-30089-2
|
Barbed Fitting Pipe Adaptor 2"
|
$5.93
|
5.04
|
4.45
|
|
CL/Sl-50005
|
Header Clip Hold Down
|
$2.50
|
2.13
|
1.88
|
|
CL/SI-50069
|
Dble hole outlet header
bracket-steep
roofs
|
$1.43
|
1.22
|
1.07
|
|
CL/Sl-30171-1
|
Header Bracket 1 1/2 Aluminum
|
$4.29
|
3.65
|
3.22
|
|
CL/SI-30177-2
|
Header Bracket 2" Aluminum
|
$5.43
|
4.62
|
4.07
|
|
CL/SI-10117-1
|
Head Bracket 2 piece 1 1/2
Aluminum
|
$11.43
|
9.72
|
8.57
|
|
CL/SI-50068
|
Extend strap Bkt - tile roof
|
$0.71
|
0.60
|
0.53
|
|
Copper Pool & Spa Solar
Collectors
| GULL INDUSTRIES Gull
4000 pool collectors are made with 62 mil thick extruded
aluminum absorber plate and copper water ways. Eight 1,12" O.D. risers,
5.5" on center, are attached to the 1.5" headers with collared Joints
and silver solder. The individual
fins are integrated into a single unit through a special interlocking
feature
for maximum strength and integrity. The absorber finish is velvet
black,
temperature resistant paint. A special silicon-based, heat transfer
compound
is used between the copper tubes and the aluminum fins, in order to
maximize
heat transfer. Manufacturer warranty is 5 years full with an additional
5
years pro-rated. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CL/GU-4000A32
|
Pool Collector 4x 8'
copper/aluminum
|
$370.00
|
314.50
|
277.50
|
|
CL/GU-4000A40
|
Pool Collector 4 x 10'
copper/aluminum
|
$408.57
|
347.28
|
306.43
|
|
CL/GU-4000A48
|
Pool Collector 4 x 12'
copper/aluminum
|
$497.14
|
422.57
|
372.86
|
|
CL GU-4000W32
|
Pool Collector 4 x 8' Cu/Al
w/
wind screen
|
$492.86
|
418.93
|
369.65
|
|
CL/GU-4000W40
|
Pool Collector 4 x 10' Cu/Al
w/
wind screen
|
$557.14
|
473.57
|
417.86
|
|
CM/GU-5000A40
|
Glazed Collector 4 x 10'
Cu/Al,
Blk paint "/1.5" hdr
|
$850.00
|
722.50
|
637.50
|
|
Sun Earth Solar Collectors
| SUN EARTH
all-copper pool collectors with 10 mil embossed absorber, coated with
black
paint. 1.5" headers and 1/2" O.D. risers 4.56" on center. Available in
4'
x 8' and 4' x 10'. Warranty: 2 years full and 3 years limited. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CL/SE-APC32
|
Pool Collector 4'x8'
all-copper,
black paint 41 lbs
|
$311.43
|
264.72
|
233.57
|
|
CL/SE-APC40
|
Pool Collector 4'xl0'
all-copper,
black paint 50 lbs
|
$341.43
|
290.22
|
256.07
|
|
CM/SE-EP40-3
|
Glazed Collector 4'xl0'
copper,
black paint, 1.5 header, 130 lbs
|
$850.00
|
722.50
|
637.50
|
|
PVC Pipe & Fittings
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CL/SM-PVC-20-05
|
PVC 2" Bushing 2"x l/2"
|
$2.14
|
1.82
|
1.61
|
|
CL/SM-PVC-20-05
|
PVC 2" Bushing 2"x l/2",
Box of 10, Each
|
$1.86
|
1.58
|
1.40
|
|
CL/SM-PVC-20-15
|
PVC 2"x 1-1/2" Reducer
|
$1.36
|
1.16
|
1.02
|
|
CL/SM-PVC-20-15
|
PVC 2"x 1-1/2" Reducer,
Box of 10, Each
|
$1.21
|
1.03
|
0.91
|
|
CL/SM-PVC-45EL20
|
PVC 2" 45EL SxS
|
$2.36
|
2.01
|
1.77
|
|
CL/SM-PVC-45EL20
|
PVC 2" 45EL SxS, Box
of
10, Each
|
$2.07
|
1.76
|
1.55
|
|
CL/SM-PVC-90EL20
|
PVC 2" 90EL SxS
|
$2.07
|
1.76
|
1.55
|
|
CL/SM-PVC-90EL20
|
PVC 2" 90EL SxS, Box
of
10, Each
|
$1.79
|
1.52
|
1.34
|
|
CL SM-PVC-CPLG20
|
PVC 2" Coupling SxS
|
$1.21
|
1.03
|
0.91
|
|
CL SM-PVC-CPLG20
|
PVC 2" Coupling SxS,
Box
of 10, Each
|
$1.07
|
0.91
|
0.80
|
|
CL/SM-PVC-T20
|
PVC 2" SxSxS
|
$2.43
|
2.07
|
1.82
|
|
CL/SM-PVC-T20
|
PVC 2" SxSxS, Box of
10,
Each
|
$2.14
|
1.82
|
1.61
|
|
CL/SM-PVC-20-5T
|
PVC 2" T SxSx 1/2 FPT
|
$4.07
|
3.46
|
3.05
|
|
CL/SM-PVC-20-5T
|
PVC 2" T SxSx 1/2 FPT,
Box
of 10, Each
|
$3.71
|
3.15
|
2.78
|
|
CL/SM-PVC-90EL20-15
|
PVC 2"x 1 1/2" ST90EL
|
$5.00
|
4.25
|
3.75
|
|
CL/SM-PVC-90EL20-15
|
PVC 2"x 1 1/2" ST90EL,
Box
of 10, Each
|
$4.43
|
3.77
|
3.32
|
|
CL/SM-PVC-20B
|
PVC 2" Pipe Schedule 40 Black
20'
|
$24.21
|
20.58
|
18.16
|
|
CL/IP-71 I QT
|
PVC Glue, one quart
|
$13.57
|
11.53
|
10.18
|
|
CL/IP-P70QT
|
PVC Primer, one quart
|
$10.71
|
9.10
|
8.03
|
|
CL/DC-2932
|
Vinyl Coated 1 1/2" Single
hole
pipe clamp
|
$1.07
|
0.91
|
0.80
|
|
CL/DC-2940
|
Vinyl Coated 2" Single hole
pipe
clamp
|
$1.07
|
0.91
|
0.80
|
|
Pool Control
| COMPOOL
Solar Pool Control with solid state electronics, for use with a booster
pump or with an existing filter pump system to automatically move the
water through
the solar panels when solar energy is available Field selectable 115 or
230V
input, 10K thermistor sensor, manual override on valve operator, sweep
delay
protects pool cleaner pump, adjustable solar differential and easy
plug-in
terminals. Dimensions Controller 9.5x8.5x4.25"; valve operator
6.5x4x3.5". |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP-LX220/2TX
|
Compool Solar Control,
includes
valve operator, compool 3-port Solar valve 90' and two temperature
sensors
|
$395.71
|
336.35
|
296.78
|
|
CN/CP-LX220/T
|
Compool Solar Control,
includes
valve operator, but not the
diverting valve, and two temperature
sensors included
|
$365.71
|
310.85
|
274.28
|
|
CN/CP-LX220/B
|
Compool Solar Control, for
controlling
solar booster pump,
add (RLY-X) relay kit for up to 2HP
pump
|
$264.29
|
224.65
|
198.22
|
|
Programmable Pool/Spa
Control Systems
| CP-380OTL, CP-3600TL,
CP-3400TL Programmable Pool/Spa Control Systems for pool
& spa
combinations where one set of filtration and heating equipment is used.
System
includes Indoor Control Panel, dim: 4x8.5x1.25" with 1.25" clearance on
each
side (surface-mounted) featuring an electronic timer for pool-spa
switching, Filter Pump, up to 7 auxiliary circuits (pool cleaner, pool
light. spa light,
water feature, air blower, landscape light etc); service switches for
all
equipment, and 4 power relays. Dual electronic thermostat, digital
temperature
display and built-in fireman switch are standard features. Hook-up
cable
(150ft) for connecting indoor control to Std power center (12x17x4") or
with
100 Amp circuit breaker subpanel (14x24x4). Optional waterproof
superswitch
provides 4-function spa-side remote control. Adding Rely-Dim will
activate
light dimming circuits in CP-3800 & CP-3600. Adding a third valve
operator
and a linear collector sensor will add solar control option.
Each
control system comes Aitli 2 Vlv actuators & two 3-port Valves.
Field
Selectable 115 or 230V input Multiple indoor controls may be hooked up
to
power center (order separately). |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP-3800TL
|
Filter & 7 Aux with
Circuit
breaker Sub-panel
|
$1942.86
|
1651.43
|
1457.15
|
|
CN/CP-3600TL
|
Filter & 5 Aux with
Circuit
breaker Sub-panel
|
$1734.29
|
1474.15
|
1300.72
|
|
CN/CP-3400TL
|
Filter & 3 Aux with
Circuit
breaker Sub-panel
|
$1357.86
|
1154.18
|
1018.40
|
|
CN/CP-3800T
|
Filter & 7 Aux with Std
power
center
|
$1872.86
|
1591.93
|
1404.65
|
|
CN/CP-3600T
|
Filter & 5 Aux with Std
power
center
|
$1664.29
|
1414.65
|
1248.22
|
|
CN/CP-3400T
|
Filter & 3 Aux with Std
power
center
|
$1288.57
|
1095.28
|
966.43
|
|
| CP-3810 Pool only
or Spa only control Systems designed for use with a single body of
water. System includes indoor control panel, featuring an electronic
timer for switching filter pump
and 7 Aux circuits-, dual thermostats (high/low); digital temp.
display: heater
cool-down cycle-, 4 power relays, service switches for all equipment*,
automatic
freeze protection. Hook-up cable (150ft.) for connecting indoor control
panel
to Std power center or power center with 100 Amp circuit breaker
sub-panel.
Optional waterproof superswitch provides 4-function Spa-side remote
control.
Adding a linear collector sensor will add solar control option.
Field
selectable 115 or 230 V input. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP-3810S
|
Pool only or Spa only control
w/Std
power center
|
$1108.57
|
942.28
|
831.43
|
|
CN/CP-3810SL
|
Pool only or Spa only control
w/circuit
breaker Sub-panel
|
$1178.57
|
1001.78
|
883.93
|
|
| CP3830 pool &
spa control systems designed for use with pools and spas which use
independent filtration systems. System includes indoor control panel
with electronic timer for spa
or pool circulation and up to 6 aux circuits-, digital T-stat and temp
display,
heater cool-down cycle- automatic freeze protection-, 4 power relays,
service
switches for all equipment. Adding a linear collector sensor will add
solar
control option. 115/230V input |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP-3830S
|
Control w/std power center
|
$1525.00
|
1296.25
|
1143.75
|
|
CN/CP-3830SL
|
Control w/circuit breaker
sub-panel
|
$1595.00
|
1355.75
|
1196.25
|
|
Pool-Spa Control System
for pool & spa combination where one set of filtration is
used including Indoor
Control Panel (surface-mounted), featuring push-button control for
Pool-Spa
switching, Aux 1 (Spa Light), Aux 2 (Pool Light) and Aux 3 (Water
Feature)-,
and a digital temperature display. Power Center (available with or
without
100 amp breaker sub-panels) at the equipment site, featuring service
switches
and 4 power relays-, mechanical time clock for the Filter Pump; and an
electronic
Fireman's Switch. 3-Port Valves (2 qty) and Valve Acutators (2 qty) for
intake
and return. Hook-tip Cable (150 feet) for connecting Indoor Control to
Power Center. NO SOLAR CAPABILITY
Optional: Mechanical time clock for
the Pool Cleaner (with filter pump interlock); 2-speed Filter Pump
Control-, auxiliary
Valve Actuator, and Spa-side Remote Control. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP100/T
|
Pool-Spa Control System w/std
powercenter
|
$968.57
|
823.28
|
726.43
|
|
CN/CP100/TL
|
Pool-Spa Control System
(w/circt
brker sub-panl)
|
$1042.86
|
886.43
|
782.15
|
|
| Switching Pool and Spa
Control System allows remote switching with toggle switches from
pool to spa and
turning on the gas heater from inside or outside the house. In the spa
position,
the pool cleaner pump is locked out. The system consists of the remote
control
(2.75x4.5x2.5") the power center (12x17x4") includes mechanical time
clock
for the filter pump, 3 power relays, electronic Fireman's switch and
two
valve operators (4x6.5x3.5"). NO SOLAR CAPABILITY |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP30T
|
Pool/spa Remote Switching
System
w/Std power center
|
$690.00
|
586.50
|
517.50
|
|
CN/CP30TL
|
Pool/spa Remote Swtchng Systm
w/circt
brkr Sub-panel
|
$758.57
|
644.78
|
568.93
|
|
| Commercial Pool-Spa
Control System is designed to control two independent filtration
systems for a
pool and spa. A large, red mushroom emergency switch (24V and double
insulated) included with the system, can cut power to all spa
equipment, meeting California commercial codes. Pushing the start
button runs the spa jets for 20 to 40
minutes (adjusted by the facility manager). A second push of the button
turns
the jets off. A built-in timer allows turning the system off during
certain
hours. Optional temperature control modules allow precise control of
the
heaters to within 1F and can also control a solar booster pump or
motorized
diverting valve (solar sensors, valve & valve operator must be
ordered
separately). |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP-LX80/2
|
Commercial pool-spa control
w/remote
switch and emergency shut-off with alarm
|
$710.00
|
603.50
|
532.50
|
|
CN/CP-MOD-SOL
|
Temperature control module
for
pool or spa
|
$130.00
|
110.50
|
97.50
|
|
Optional Equipment
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/CP-MOD-SOL
|
Temp. Control Module (LX80)
|
$130.00
|
110.50
|
97.50
|
|
CN/CP-VOR-24Y
|
Valve operator for 120
degree
|
$202.86
|
172.43
|
152.15
|
|
CN/CP-VOR-24T
|
Valve operator for 180
degree
|
$202.86
|
172.43
|
152.15
|
|
CN/CP-OVA2
|
Valve adapter for 2" Ortega
to
VOR-24T
|
$21.43
|
18.22
|
16.07
|
|
CN/CP-RLY-SC
|
Relay for booster pmp. cntrl.
or
pool cleaner protec.
|
$41.43
|
35.22
|
31.07
|
|
CN/CP-RLY-LX
|
Additional relay for
auxiliary
equipment
|
$45.71
|
38.85
|
34.28
|
|
CN/CP-RLY-LXD
|
2-speed filter pump
relay
|
$72.86
|
61.93
|
54.65
|
|
CN/CP-RLY-DIM
|
Light Dimming Mod (1000 watts
max)
|
$97.14
|
82.57
|
72.86
|
|
CN/CP-3400
|
Indoor Remote W/Cable
|
$238.57
|
202.78
|
178.93
|
|
CN/CP-3600
|
Indoor Remote W/Cable
|
$297.14
|
252.57
|
222.86
|
|
CN/CP-3800
|
Indoor Remote W/Cable
|
$377.14
|
320.57
|
282.86
|
|
CN/CP-3810
|
Indoor Remote W/Cable
|
$377.14
|
320.57
|
282.86
|
|
CN/CP-SS4-50
|
4-function spa-side remote
control
w/50' cable
|
$122.86
|
104.43
|
92.15
|
|
CN/CP-SS4-100
|
4-function spa-side remote
control
w/100' cable
|
$137.14
|
116.57
|
102.86
|
|
CN/CP-SS4-150
|
4-function spa-side remote
control
w/1 50' cable
|
$152.14
|
129.32
|
114.11
|
|
TS/CP-5L
|
Solar Sensor, Linear
|
$28.57
|
24.28
|
21.43
|
|
TS/CP-5T
|
Solar Sensor, 10K thermistor
|
$23.57
|
20.03
|
17.68
|
|
DV/CP-SOL-2T
|
Solar Valve with Draindown
|
$45.00
|
38.25
|
33.75
|
|
CN/CP-UNI-1C
|
Valve Union, Copper 1.5"
|
$21.43
|
18.22
|
16.07
|
|
CN/CP-UNl-2C
|
Valve Union, Copper 2"
|
$21.43
|
18.22
|
16.07
|
|
CN/CP-UNI-2P
|
Valve Union, PVC 2"/ 1.5"
|
$21.43
|
18.22
|
16.07
|
|
DV/CP-PTV-1S
|
2 Way valve CPVC 1.5"
|
$35.71
|
30.35
|
26.78
|
|
DV/CP-PTV-2S
|
2 Way valve CPVC 2"
|
$37.86
|
32.18
|
28.40
|
|
DV/CP-PTV-2T
|
3 Way valve CPVC 2"
|
$45.00
|
38.25
|
33.75
|
|
DV/CP-DIV-20F
|
Replacement Diverter 90
degree
valve
|
$25.71
|
21.85
|
19.28
|
|
DV/CP-DIV-20FS
|
Replacement Diverter solar
valve
|
$35.71
|
30.35
|
26.78
|
|
DV/CP-DIV-25F
|
Replacement Diverter "Y" valve
|
$25.71
|
21.85
|
19.28
|
|
Timers
| INTERMATIC CENTURY TIME
SWITCHES for timed operation of pool
and spa
pumps, chlorinators and lights, as well as other electrical devices.
They
provide 1 to 12 On-Off operations each day, depending on the number of
trippers used. Each On-Off cycle can be set for 1 to 23 hours. Drawn
steel housing is 7.75"H x 5"W x3"D, with gray finish and spring hasp
with hole for lock. The units are also available with raintight
enclosure (model numbers ending in R). Clock motors are available in
125volt, 60Hz for up to 2HP, or 208277 volt, 60Hz for up to 5HP. Wt
2.75 lbs. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/IM-T101
|
Timer with indoor enclosure
120V
|
$57.50
|
48.88
|
43.13
|
|
CN/IM-T101R
|
Timer with outdoor enclosure
120V
|
$86.79
|
73.77
|
65.09
|
|
CN/IM-T104
|
Timer with indoor enclosure
240V
|
$69.29
|
58.90
|
51.97
|
|
CN/lM-T104R
|
Timer with outdoor enclosure
240V
|
$94.64
|
80.44
|
70.98
|
|
CN/IM-T101M
|
Time Clock Mechanism for T
101,
120V
|
$55.21
|
46.93
|
41.41
|
|
CN/IM-T104M
|
Time Clock Mechanism for T
104,
240V
|
$68.57
|
58.28
|
51.43
|
|
CN/IM-T10404R
|
Timer dual with outdoor 240
|
$135.71
|
115.35
|
101.78
|
|
Independent Energy
| GL35 pool or
spa controls with field selectable 120V or 240V input. Built-in
motorized valve output provided through built-in LV relay (field
selectable 12VAC or 24VAC). Calibrated temperature dial (70-140F).
On-autooff switch 4F on and 1.5F off differential thresholds. Field
selectable nocturnal cooling capability 6F on/3F off thresholds.
Field selectable recirc freeze protection 40F on/45F off thresholds
(requires
GC-1 snapswitch, ordered seperately). Four LED indicators for power,
heating,
cooling and freeze protection activated. Terminal blocks for all
connections.
Also available with a 3-way motorized valve and two sensors as "Combo".
Warranty
Ten-year Limited: first 2 yrs no charge repair or replace; yrs 3-5 max
25%
of list; yrs 6-10 max 50% of Price |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/IE-GL-35
|
Pool Control with single
24VAC
output
|
$217.14
|
184.57
|
162.86
|
|
CN/IE-GL-35-HV
|
Pool Control for booster pump
with
one 24VAC & 1 high volt. output 1 HP 11 5VAC or 2HP 240VAC
|
$246.43
|
209.47
|
184.82
|
|
CN/IE-GLC
|
Pool Control with one Jandy
motorized
valve*
|
$398.57
|
338.78
|
298.93
|
|
CN/IE-GLC-PS
|
Pool/Spa Control w/ two 24V
actuators
(valves are not included)
|
$650.71
|
553.10
|
488.03
|
*Specify diverting
valve
size as I P=1.5"/2" pos or 2P=2"/2.5" pos or 2PN=2"/2.5" non pos
|
| INDEPENDENT ENERGY
GOLDLINE GL33 Adjustable "on"
differential 8 to
24F, fixed "off' differential 4F, adjustable hi-limit 50-104F. Output
power max 7.2A at 120VAC, up to 1/3HP. Dimensions: 5 5/8"x4 7/8"x 2
3/8", weight 2 Lbs. Continuous temperature display optional by snapping
in a TD-GL digital LCD thermometer (listed below), which can also
display the min, max and set
point (Indoor Installation Only). |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/IE-GL33
|
Pool Control
|
$144.64
|
122.94
|
108.48
|
|
CN/IE-TDGL
|
Digital LCD thermometer
Two-point
Snaps in GL33
|
$121.43
|
103.22
|
91.07
|
|
TM/IE-TD6
|
Digital Therm (6-station)
with
memory sensor incl
|
$171.43
|
145.72
|
128.57
|
|
| GOLDLINE SET POINT
CONTROLS
are electronic thermostat aquastats that have many advantages over
mechanical controls. They are easy to install and service, work off 24,
120 or 240VAC, allow long distance temperature sensing (up to 1000')
and offer more accurate temperature control SPDT relays. One I OK
thermistor sensor included. Optional LCD digital temperature display
from two points is available by snapping in
a TD-30 digital thermometer. Ideal for hot tub/spa temperature control
(indoor
Installation Only). |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/IE-SP30
|
Set Point Control with dble
range
selectable -30 to 100 or 70 to 200
|
$94.29
|
80.15
|
70.72
|
|
CN/IE-SP33
|
Set point Control with a
range
of 40-104F
|
$94.29
|
80.15
|
70.72
|
|
CN/IE-TD-30
|
Snap-in LCD digital
thermometer
for use with SP Controls with memory for min/max temperatures
|
$94.29
|
80.15
|
70.72
|
|
| JANDY MOLDED CPVC
DIVERTING VALVES are designed for
high flow and low
maintenance. A built-in lubrication fitting allows you to lubricate
valve
just with the turn of a knob, without any need for valve dis-assembly.
Available in two sizes: one for 1.5" socket/2" slip outside and another
for 2" socket/2.5 11 slip outside. One year warranty. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
DV/JY-2875
|
Diverting Valve 3-way CPVC
2"/2.5"
Positive Seal
|
$38.21
|
32.48
|
28.66
|
|
DVJY-4715
|
Diverting Valve 3-way CPVC
1.5"/2"
No Lubrication
|
$46.07
|
39.16
|
34.55
|
|
DV/JY-4717
|
Diverting Valve 3-way CPVC
2"/2.5"
No Lubrication
|
$47.86
|
40.68
|
35.90
|
|
DV/JY-4716
|
Diverting Valve 2-way CPVC
2"/2.5"
No Lubrication
|
$40.36
|
34.31
|
30.27
|
|
| JANDY VALVE ACTUATORS
Any of the above valves can be converted to motorized valves by adding,
a
12 volt (1.05 amp) or 24 volt (0.55amp) actuator, designed specifically
for Jandy valves. They are powered by reversible permanent split
capacitor, synchronous
motors for bi-directional travel. A toggle switch provides convenient
manual
override. They comply with NEMA4 specifications and are UL-listed.
Durable,
corrosion-resistant, weather-tight metal enclosure. Limited one-year
warranty. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/JN-4424
|
Valve Actuator 24 VAC
|
$235.71
|
200.35
|
176.78
|
|
CN/JY-44 12
|
Valve Actuator 12 VAC
|
$235.71
|
200.35
|
176.78
|
|
Pool Cleaners
| JANDY RAY-VAC
Automatic Pool Vacuum and Sweep is a sleek-looking, effective, energy
efficient, pool cleaner that does not require a separate sweep pump,
because it can operate
with the filtration pump. It quietly glides under water, seeking out
the
debris, and its Hyro-Timer controls the forward and backward motions of
the
head, ensuring complete coverage of the floor and walls, including the
steps,
loveseats and comers. The transparent side windows allow you to see the
debris
and empty the head, by simply unlatching the cover. The powerful line
jets
and whip-hose trailing behind, agitate and dislodge any debris stuck to
the
surfaces. The unit rests at the bottom of the pool when turned off.
Minimum
requirement for filter pump 1 HP. Minimum requirement for booster pump
1/2
HP. Dimensions: 25"L x 11"W x4"D. Installation kit and 22ft. hose
included. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/JY-2880
|
Ray-Vac Pool Sweep, White
|
$600.00
|
510.00
|
450.00
|
|
PF/JY-3195
|
Ray-Vac Pool Sweep, Black
|
$600.00
|
510.00
|
450.00
|
|
PU/SI-PLBC
|
Booster Pump 1/2 HP with
Ray-Vac
Pool Sweep
|
$242.86
|
206.43
|
182.15
|
|
PF/JY-2887
|
Energy Filter Kit w/ gauge
&
valve
|
$52.14
|
44.32
|
39.11
|
|
PF/JY-3272
|
3' Hose Ext Kit
|
$12.50
|
10.63
|
9.38
|
|
Temperature Sensors
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
TS/IE-INS1
|
Collector Simulator,
temperature
sensor
|
$22.86
|
19.43
|
17.15
|
|
TS/IE-SC
|
Screw-on, temperature sensor
|
$22.86
|
19.43
|
17.15
|
|
TS/IE-SB
|
Strap-on, temperature sensor
|
$20.00
|
17.00
|
15.00
|
|
TS/IE-GC1
|
Freeze snap switch, 44 degree
open,
54 degree close
|
$41.43
|
35.22
|
31.07
|
|
Electronic Controls for
Pool/Spa Combination
| JANDY AQUALINK RS4
with automatic scrolling LCD digital display provides programmable push
button control of basic pool and spa features such as filter pumps, spa
switch over
and three auxiliaries with programmability of filter pump, spa, Aux
1-3.
The controller requires a power center to operate, choose either
standard power center (comes with four relays) or breaker sub-panel
power center (four
relays plus GFCl outlet option and breakers option). |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/JY-6685
|
Aqualink RS4 Control w/ 2
JVA2440
PC Board and one water sensor & one air sensor
|
$922.14
|
783.82
|
691.61
|
|
CN/JY-6613
|
Standard Power Center w/ 4
Relay
Board
|
$335.71
|
285.35
|
251.78
|
|
CN/JY-6614
|
Breaker Sub-Panel Power
Center
w/ 4 relays
|
$400.71
|
340.60
|
300.53
|
|
CN/JY-6688
|
Aqualink RS4 Pool only or Spa
only
|
$689.64
|
586.19
|
517.23
|
|
| AQUALINK RS6
does everything that Aqualink RS4 does with programmabilty of filter
pump,
spa switchover and Aux 1-5 and heater. Solar option available by
adding one
JVA2440 & one roof sensor. The optional 4 function spa-side remote
switch
allows you to control four auxiliaries. The controller requires a power
center
to operate, choose either standard power center (comes with four
relays)
or breaker sub-panel power center (four relays plus GFCl outlet option
and
breakers option). Two additional relays are needed to operate Aux. 4
&
5. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/JY-6686
|
Aqualink RS6 Control w/2
JVAA2440,
1 low voltage PC Board and one water sensor & one air sensor
|
$1295.36
|
1101.06
|
971.52
|
|
CN/JY-6613
|
Standard Power Center
|
$335.71
|
285.35
|
251.78
|
|
CN/JY-6614
|
Breaker Sub-Panel Power
Center
w/4 relays
|
$400.71
|
340.60
|
300.53
|
|
CN/JY-6689
|
Aqualink RS6 Pool only or Spa
only
|
$1109.29
|
942.90
|
831.97
|
|
| Aqualink RS8
designed for the ultimate pool and spa combination controlling with
programmability of filter pump, spa switchover, Aux 1, 2, 3, 4, 5, 6
& 7. Solar option available by adding one JVA2440 & one roof
sensor. The controller requires a power center to operate, choose
either standard power center (comes with four relays) or breaker
sub-panel power center (four relays plus GFCl outlet option and
breakers option). Four additional relays are needed to operate Aux
4-7. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/JY-6887
|
Aqualink RS8 Control w/4 JVA
2440,
1 low voltage PC Board and one water sensor & one air sensor
|
$1668.21
|
1417.98
|
1251.16
|
|
CN/JY-6613
|
Standard Power Center
|
$335.71
|
285.35
|
251.78
|
|
CN/JY-6614
|
Breaker Sub-Panel Power
Center
w/4 relays
|
$400.71
|
340.60
|
300.53
|
|
CN/JY-6690
|
Aqualink RS8 Pool only or Spa
only
|
$1612.14
|
1370.32
|
1209.11
|
All Aqualink RS
models
can accept two 4 function spa switches (additional board is needed @
$65.00)
|
Optional Components for
Jandy Controls
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
TS/JY-7786
|
10K Temp. Sensor Kit water,
Air
or Solar
|
$60.00
|
51.00
|
45.00
|
|
TS/JY-3702
|
1K Sensor for JI 8000 only
|
$64.29
|
54.65
|
48.22
|
|
CN/JY-4424
|
Valve Operator 24VAC 3 Port
|
$235.71
|
200.35
|
176.78
|
|
CN/JY-6590
|
Telelink for AquaLink
|
$535.71
|
455.35
|
401.78
|
|
CN/JY-7227
|
SpaLink RS, 8 Function 150'
|
$427.14
|
363.07
|
320.36
|
|
CN/JY-7443
|
SpaSide remote 4 Function 150'
|
$184.29
|
156.65
|
138.22
|
|
CN/JY-7270
|
AquaLink RS PC interface
|
$342.86
|
291.43
|
257.15
|
|
| JANDY MOLDED CPVC
DIVERTING VALVES are designed for
high flow and low
maintenance. A built-in lubrication fitting allows you to lubricate
valve
just with the turn of a knob, without any need for valve dis-assembly.
Available in two sizes: one for 1.5" socket/2" slip outside and another
for 2" socket/2.5 11 slip outside. One year warranty. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
DV/JY-2875
|
Diverting Valve 3-way CPVC
2"/2.5"
Positive Seal
|
$38.21
|
32.48
|
28.66
|
|
DVJY-4715
|
Diverting Valve 3-way CPVC
1.5"/2"
No Lubrication
|
$46.07
|
39.16
|
34.55
|
|
DV/JY-4717
|
Diverting Valve 3-way CPVC
2"/2.5"
No Lubrication
|
$47.86
|
40.68
|
35.90
|
|
DV/JY-4716
|
Diverting Valve 2-way CPVC
2"/2.5"
No Lubrication
|
$40.36
|
34.31
|
30.27
|
|
Jandy Valve Actuators
| Any of the above valves
can be converted to motorized valves by adding, a 12 volt (1.05 amp) or
24 volt (0.55amp) actuator,
designed specifically for Jandy valves. They are powered by reversible
permanent
split capacitor, synchronous motors for bi-directional travel. A toggle
switch
provides convenient manual override. They comply with NEMA4
specifications
and are UL-listed. Durable, corrosion-resistant, weather-tight metal
enclosure.
Limited one-year warranty. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CN/JN-4424
|
Valve Actuator 24 VAC
|
$235.71
|
200.35
|
176.78
|
|
CN/JY-4412
|
Valve Actuator 12 VAC
|
$235.71
|
200.35
|
176.78
|
|
Pool Cleaners
| JANDY RAY-VAC
Automatic Pool Vacuum and Sweep is a sleek-looking, effective, energy
efficient, pool cleaner that does not require a separate sweep pump,
because it can operate
with the filtration pump. It quietly glides under water, seeking out
the
debris, and its Hyro-Timer controls the forward and backward motions of
the
head, ensuring complete coverage of the floor and walls, including the
steps,
loveseats and corners. The transparent side windows allow you to see
the
debris and empty the head, by simply unlatching the cover. The powerful
line
jets and whip-hose trailing behind, agitate and dislodge any debris
stuck
to the surfaces. The unit rests at the bottom of the pool when turned
off.
Minimum requirement for filter pump 1 HP. Minimum requirement for
booster
pump 1/2 HP. Dimensions: 25"L x 11"W x4"D. Installation kit and 22ft.
hose
included. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/JY-2880
|
Ray-Vac Pool Sweep, White
|
$600.00
|
510.00
|
450.00
|
|
PF/JY-3195
|
Ray-Vac Pool Sweep, Black
|
$600.00
|
510.00
|
450.00
|
|
PU/SI-PLBC
|
Booster Pump 1/2 HP with
Ray-Vac
Pool Sweep
|
$242.86
|
206.43
|
182.15
|
|
PF/JY-2887
|
Energy Filter Kit w/gauge
&
valve
|
$52.14
|
44.32
|
39.11
|
|
PF/JY-3272
|
3' Hose Ext Kit
|
$12.50
|
10.63
|
9.38
|
|
Solar Electricity (PV)
For Powering AC Swimming Pool
Filtration
Pump
| Swimming pool filtration pumps use a fair amount
of electricity to keep your pool clean. Now there is a way to power
your filtration pump with electricity from sunshine. In California, and
other states, our FiltaSol systems qualify for the state
renewables buydown rebates (Calif:
$4.50 per Watt if you buy your electricity from PG&E, SEC or
SDG&E). These systems make it possible
to power your
pool filtration pump with electricity generated by Solar PV panels,
during
still light hours and thereby saving you the cost of electricity
normally
provided by the utility company. The system consists of solar panels
installed
on or near your pool equipment shed, and a pool pump inverter that
converts
the solar power to the AC power required by your existing pool pump.
The
system includes a bypass switch to allow you to run your pump on
utility
power, on cloudy days or after sundown, if you wish. In new
construction
we suggest you find the most efficient pool pump available. Also, if
your
existing pool pump is old and inefficient, we can suggest a replacement
pump
and supply it. Depending on the size of your pool and filtration pump,
we
offer the Filta-Sol in several different sizes. |
|
Model No.
|
Existing Pool Pump
|
PV Power(Wp)/VDC
|
Panel Area
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea
|
|
PP/SD-FS10
|
1.0 HP
|
960W/272
|
6.5x14.5'
|
$8848.57
(before CA Rebate)
|
7521.28
|
6636.43
|
|
PP/SD-FS15
|
1.5 HP
|
1440W/204
|
6.5x22'
|
$12115.71
(before CA Rebate)
|
10298.35
|
9086.78
|
|
PP/SD-FS20
|
2.0 HP
|
2200W/336
|
6.5x36'
|
$17471.43
(before CA Rebate)
|
14850.72
|
13103.57
|
PP/SD-FS25-50
2.5 to 5.0 HP Call us for Quote
|
Pool Filtration With DC
Pumps
For remote locations where
there
is no utility power available, and there is no need to run the
filtration pump after sundown, we offer another system that
utilizes DC pumps, ranging from 1/2HP to 1 HP. Because the pump
is directly connected to the output of the solar panels, it starts
running
shortly after sunrise and continues until shortly before sunset.
Naturally
in the summer when the days are longer, the pump runs for more hours
per
day and, in the winter, for fewer hours per day. On cloudy and overcast
days
the pump runs more slowly, pumping less water through the filter. All
this
makes the FiltaSol pool pumping system a natural fit for swimming pool
filtration.
Algae growth is accelerated in the summer when the days are longer and
the
water is warmer, requiring more filtration capacity. In the winter when
the
days are shorter, and the water temperatures are cooler, the algae
growth
is retarded and the pool requires less filtration. Most conventional
pool filtration systems have a timer programmed to run the pump for
four hours per day in the summer. Since the FiltaSol system would run
the pump six to
ten hours per day in the summer (depending on location), the pump size
required
for the filtration of a given size pool may be reduced by 40 to 60
percent.
On the other hand the fixed solar array produces variable power from
sun
up to sun down, with the maximum power produced at noon. The pump
therefore
runs at lower speeds, pumping less gallons per minute but for longer
hours
per day, effectively accomplishing the same amount of filtration.
Our tests show that cartridge filters are
most suitable for use with the solar powered pumps, somewhat oversized
sand filters
do well also, but the diatomatious earth (DE) filters are least
suitable
because they produce greater pressure drops, requiring larger pumps.
The prices below include the DC pumps also.
Allow 3 weeks for delivery of DC pump from factory. |
|
Model No.
|
Ref No.
|
Pump HP
|
Sys.Volt.
|
PV Power (Peak)
|
PV Modules Qty/Size
|
Panel Area
|
Pump Length
|
Shipping Wt.
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PP/SD-HP50
|
1878-B
|
1/2
|
100
|
660 watts
|
12x55W
|
7'4"x10'
|
24.5"
|
325 lb.
|
$6091.00
|
5177.35
|
4568.25
|
|
PP/SD-HP75
|
1878-A
|
3/4
|
100
|
960 watts
|
12x80W
|
9'8"x10'
|
25.5"
|
420 lb.
|
$7957.00
|
6763.45
|
5967.75
|
|
PP/SD-HP100
|
1878-D
|
1
|
100
|
1440 watts
|
18x80W
|
14'6"x10'
|
26.5
|
600 lb.
|
$11535.00
|
9804.75
|
8651.25
|
|
Pumps AC
| HAYWARD Max-Flo
Series are heavy duty and high performance pumps with air flow
ventilation, built-in thermal overload switch, and permanently
lubricated sealed bearings. The pump
is molded of rugged corrosion-proof permaglass thermoplastic. The
impeller
is made of corrosion-proof fiberglass-filled Noryl. Long wearing heat
resistant
& drip-proof ceramic seal. Rigid strainer basket can be easily
removed
for cleaning without any tools. Clear Lexan strainer cover lets you see
when
basket needs cleaning. Service-Ease design allows easy removal of all
internal
parts. Up to 1.5 HP pumps have 1.5" FIP Suction. 2 to 3 HP pumps have
2"
FIP Suction. Unique mounting base provides stable, balanced,
stress-free
support and versatility of installation. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PU/HD-SP2800X5
|
Pump MaxFlo 1/2 HP 1.5" 115V
Single
speed
|
$295.36
|
251.05
|
221.52
|
|
PU/HD-SP2805X7
|
Pump MaxFlo 3/4 HP 1.5"
115/230V
Single speed
|
$325.36
|
276.56
|
244.02
|
|
PU/HD-SP2807X10
|
Pump MaxFlo 1 HP 1.5"
115/230V
Single speed
|
$355.00
|
301.75
|
266.25
|
|
PU/HD-SP2810X15
|
Pump MaxFlo 1.5 HP 1.5"
115/230V
Single speed
|
$387.86
|
329.68
|
290.90
|
|
PU/HD-SP2815X20
|
Pump MaxFlo 2 HP 1.5"
115/230V
Single speed
|
$457.86
|
388.96
|
343.40
|
|
| SUPER 11 PUMPS
Series are similar to Max-Flo, except they are high performance and
offer
higher energy efficiency and produce a higher flow rate for a given
horse
power. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PU/HD-SP3007
|
Pump Super 11 3/4 HP 2"
115/230V
Full Rated
|
$412.86
|
350.93
|
309.65
|
|
PU/HD-SP3010
|
Pump Super 11 1 HP 2"
115/230V
Full Rated
|
$444.29
|
377.65
|
333.22
|
|
PU/HD-SP3015
|
Pump Super 11 1.5 HP 2" 230V
Full
Rated
|
$514.29
|
437.15
|
385.72
|
|
PU/HD-SP3020
|
Pump Super 11 2 HP 2" 230V
Full
Rated
|
$606.43
|
515.47
|
424.50
|
|
PU/HD-SP3025
|
Pump Super 11 3 HP 2" 230V
Full
Rated
|
$741.43
|
630.22
|
556.07
|
|
PU/HD-SP3005x7
|
Pump Super 11 3/4 HP 1.5"
115/230V
Max Rated
|
$380.36
|
323.31
|
285.27
|
|
PU/HD-SP3007x10
|
Pump Super 11 1 HP 1.5"
115/230V
Max Rated
|
$412.86
|
350.93
|
309.65
|
|
PU/HD-SP3010X15
|
Pump Super 11 1.5 HP 2"
115/230V
Max Rated
|
$444.29
|
377.65
|
333.22
|
|
PU/HD-SP3015x20
|
Pump Super 11 2 HP 2"
115/230V
Max Rated
|
$514.29
|
437.15
|
385.72
|
|
PU/HD-SP3020X25
|
Pump Super 11 2.5 HP 2"
115/23
0V Max Rated
|
$606.43
|
515.47
|
454.82
|
|
| POWER-FLO
Series High Performance Spa Pump, and solar booster pumps UL-listed
single
phase, 115V. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PU/HD-SP1500UN
|
Pump PowerFlo 1/2 HP, 1.5"
Union,
Single speed
|
$180.00
|
153.00
|
135.00
|
|
PU/HD-SP1510UN
|
Pump PowerFlo 3/4 HP, 1.5"
Union,
Single speed
|
$187.14
|
159.07
|
140.36
|
|
PU/HD-SP1511UN2
|
Pump PowerFlo 1 HP, 1.5"
Union,
Dual speed*
|
$245.00
|
208.25
|
183.75
|
|
Pool/Spa Filters
& Accessories
| HAYWARD Star Clear
11
Cartridge filters with Duralon housing and Lexan filter head which
removes
with a single locking knob for easy cleaning and replacement of filter
cartridge. Pressure gauge, manual air relief and built in check valve
are standard. The
single element cartridge (included) is made of high quality reinforced
polyester
with gasketed molded end caps for long life and easy cleaning. The
integral
mounting base provides stable corrosion free support. |
|
Model No.
|
Area/Port Size
|
Element
|
Dimension
|
Flow Range
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/HD-C250
|
25sq. ft./1.5"
|
CX250RE
|
8.5"diax 19.5"hi
|
25 gpm
|
$167.14
|
142.07
|
125.36
|
|
PF/HD-C500
|
50sq. ft./1.5"
|
CX500RE
|
10.5"diax 29hi
|
50 gpm
|
$222.86
|
189.43
|
167.15
|
|
PF/HD-C900
|
90sq. ft./1.5"
|
CX900RE
|
13"diax 30"hi
|
75 gpm
|
$283.57
|
241.03
|
212.68
|
|
PF/HD-C 1200
|
120sq. ft./2.0"
|
CX1200RE
|
13"diax 36"hi
|
100 gpm
|
$375.71
|
319.35
|
281.78
|
|
PF/HD-C1750
|
175sq. ft./2.0"
|
CX1750RE
|
13"diax 43"hi
|
150 gpm
|
$498.57
|
423.78
|
373.93
|
|
PF/HD-C3000
|
300sq. ft./2.0"
|
(4)CX570RE
|
23"diax 37.5"hi
|
150 gpm
|
$807.14
|
686.07
|
605.36
|
|
PF/HD-C4000
|
400sq. ft./2.0"
|
(4)CX870RE
|
23"diax 43.5"hi
|
150 gpm
|
$903.57
|
768.03
|
677.68
|
|
Sand Filters
| High rate, corrosion-proof
polymeric filters are easy to maintain with top mounted 6-position
vari-flo control valve automatic air relief, top diffuser, efficient
slotted, multi-lateral underdrain assembly gives balanced flow and
allows total draining of filter for winter or service. All filter
components are serviceable using only a
screw driver and wrench. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/HD-S244T
|
3.14 Top mnt vlv 23.5"diax
42"hi
63 gpm
|
$357.14
|
303.57
|
267.86
|
|
PF/HD-S310T-2
|
4.90 Top mnt with 2" Vlv 30"
dia
102 gpm
|
$526.43
|
447.47
|
394.82
|
|
| *MICRO CLEAR
diatomacious earth filters use the DE filter elements. They are
available
in stainless steel or molded corrosion-proof Duralon. Pressure gauge
and
manual air relief are standard. Quick service access with center flange
and
clamp. Option of 6-position vari-flo control valve or 2-position slide
valves. |
|
Model No.
|
Area (sq ft)
|
Element
|
Dimen.
|
Flow Range
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/HD-DE-2400
|
24
|
Duralon
|
23"diax 3l.5"hi
|
48 gpm
|
$487.14
|
414.07
|
365.36
|
|
PF/HD-DE-3600
|
36
|
Duralon
|
23"diax 36.5"hi
|
72 gpm
|
$542.86
|
461.43
|
407.15
|
|
PF/HD-DE-4800
|
48
|
Duralon
|
23"diax 42.5"hi
|
96 gpm
|
$608.57
|
517.28
|
456.43
|
|
PF/HD-DE-6000
|
60
|
Duralon
|
23"diax 48.5"hi
|
120 gpm
|
$670.00
|
569.50
|
502.50
|
|
PF/HD-DE-480S
|
48
|
Stainless Steel
|
19"diax 41.5"hi
|
96 gpm
|
$725.71
|
616.85
|
544.28
|
|
| *VARI-FLO
Multiport Valves, molded ABS construction, built-in sight glass. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/HD-SP710XR50
|
Vari-Flo 6-position Vlv All
port
variations thrd 1.5"
|
$57.14
|
48.57
|
42.86
|
|
PF/HD-SP716-21
|
Vari-Flo 6-position Vlv All
port
variations thrd 2"
|
$85.71
|
72.85
|
64.28
|
|
PF/HD-SP711-13
|
Vari-Flo 6-position Vliv 1.5"
Flange
Mount Brown
|
$55.71
|
47.35
|
41.78
|
|
PF/HD-SP410X502S
|
Slide 6-position Vlv 2" SKT
5-port
|
$51.43
|
43.72
|
38.57
|
|
Skimmers
| HAYWARD
Skim-Master is a versatile. large capacity automatic
surface
skimmer for concrete residential or commercial pools. It features
durable
corrosion-proof uni-body construction, adjustable deck collar and
access
cover, self-adjusting 8" weir, large debris basket and multiple
plumbing
connections for easier installation. The Float/By-Pass Valve(included in model numbers ending
in A ) provides a main drain-thru-skimmer
system plus an automatic safety by-pass for low water conditions.
Dimensions: 10.5 x 19 x 15". |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/HD-SP1070-FVA
|
Automatic surface skimmer
1.5"
FIP
|
$85.00
|
72.25
|
63.75
|
|
PFIHD-SP1070-SFVA
|
Automatic surface skimmer
1.5"
SKT
|
$85.00
|
72.25
|
63.75
|
|
PF/HD-SP1070-2FVA
|
Automatic surface skimmer
2.0"
FIP
|
$85.00
|
72.25
|
63.75
|
|
PF/HD-SP1070-2SFVA
|
Automatic surface skimmer
2.0"
SKT
|
$85.00
|
72.25
|
63.75
|
|
Pool/Spa Sanitizers
| FLOATRON Solar-Powered
Water Purifier for Pool and Spa is an ionizer that uses the
electricity generated
by its solar cell to ionize metal ions front its copper alloy electrode
and
introduce it to pool water These metalic ions control micro organism
growth
in the water reducing the need for chlorine by 80% (typical). This
makes
the pool water safer for the eyes, skin, hair and bathing suits! Unlike
chlorine,
the metalic ions remain effective for weeks. The unit requires no
batteries
for its operation. Electrodes require replacement after 1 to 2 seasons
depending
on water quality. Weather proof resistant to sunlight and chemicals.
One
year limited warranty. A water test kit included with the unit. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/FT-100
|
Floatron Solar Ionizer for
Pool
|
$282.86
|
240.43
|
212.15
|
|
Pool Cleaners
| *ARNESON Automatic
Pool Cleaners Pool Sweep designed with a programmed pattern to cover
the entire pool. Requires
a separate booster pump. It rinses border tiles. No debris bag needed.
Includes
leaf trap. Comes with 16'+ 16'+6' feeder hose and 10'+ 13' sweep hose. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/AN-PS2
|
Pool Sweep 11 (can work under
Solar
blanket)
|
$427.14
|
363.07
|
320.36
|
|
| TUNE-UP KIT:
Complete rebuild kit for Pool Sweep One. Includes head, mender nuts,
swivels,
large float. floor & wall sweep hoses with fittings. and housing
tires. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
PF/AN-206
|
Tune-Up Kit for Pool Sweep One
|
$107.14
|
91.07
|
80.36
|
|
Pool & Spa
Heaters, Gas-Fired
| TELEDYNE LAARS Lite
gas heaters for pool and spa with many built-in safety features are
highly energy efficient (82%) using an internal copper finned-tube heat
exchanger and stainless steel
burner. They are ISO 9002 and CE certified and available in five sizes
from
125 to 400 KBTU/H. Dual thermostat control for pool/spa combination, or
for
preheat convenience, with an accuracy of ±2F and the exclusive Temp-Lok
feature
that allows you to lock in the maximum temperature desired. The
automatic
constant flow control valve regulates proper water flow through the
heat
exchange tube, assuring long life and low maintenance. Self-Cleaning
Hot surface ignition provides quick start-up and maintenance
free operation. These heaters may be installed outdoors or equipped for
indoor use with the
addition of a drafthood and stack. Indoor draft hoods or outdoor vent
cap
stacks (needed in high wind areas) are available. With the new Ceramic
Fiber
Combustion chamber these heaters are truly weather resistant. Maximum
working
pressure 75 psi. The controls, heat exchanger and combustion chamber
are
warranteed for two years and all other parts for five years against
defects
in material and workmanship. Dual thermostat control |
|
Model No.
|
Input
KBTU/H
|
Dimens.
WxLxH"
|
Vent inch
|
Wt. lbs
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
WH/TL-LLD125N
|
125
|
15x26.5x36.25
|
5
|
148
|
$1122.86
|
954.43
|
842.15
|
|
WH/TL-LLD175N
|
175
|
18x26.5x36.25
|
6
|
175
|
$1321.43
|
1123.22
|
991.07
|
|
WH/TL-LLD250N
|
250
|
22.5x26.5x36.25
|
7
|
182
|
$1475.00
|
1253.75
|
1106.25
|
|
WH/TL-LLD325N
|
325
|
26.75x26.5x36.25
|
8
|
214
|
$1685.00
|
1432.25
|
1263.75
|
|
WH/TL-LLD400N
|
400
|
31.75x26.5x36.25
|
9
|
228
|
$1903.57
|
1618.03
|
1427.68
|
|
| TELEDYNE LAARS LLG
models, the same as LLD models but for operation with LP gas and with
standard pilot. |
|
Model No.
|
Input
KBTU/H
|
Dimens.
WxLxH"
|
Vent inch
|
Wt. lbs
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
WH/TL-LLG125P
|
125
|
15x26.5x39.25
|
5
|
215
|
$1040.00
|
884.00
|
780.00
|
|
WH/TL-LLG175P
|
175
|
18x26.5x39.25
|
6
|
240
|
$1261.43
|
1072.22
|
946.07
|
|
WH/TL-LLG250P
|
250
|
22.5x26.5x39.25
|
7
|
270
|
$1387.14
|
1179.07
|
1040.36
|
|
WH/TL-LLG325P
|
325
|
26.75x26.5x39.25
|
8
|
310
|
$1612.14
|
1370.32
|
1209.11
|
|
WH'TL-LLG400P
|
400
|
31.75x26.5x39.25
|
9
|
345
|
$1812.50
|
1540.63
|
1359.38
|
|
| H1-2E POOL HEATER BY
TELEDYNE
LAARS is a state-of-the-art 95%
energy efficient unit with steel mesh radiant burner and copper-tube
heat exchanger and 2"
bronze headers. Electronic dual temperature control and hi-limit
switches, hot surface ignition, 220 and 350 KBTU/H input, natural gas
or LPG (specify), indoor or outdoor use (specify). Ship Wt: 450 lbs; 5
year limited warranty |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
WH/TL-EHE-220
|
Pool Water Heater 220KBTU/H
Hi-Efficiency
|
$4164.29
|
3539.65
|
3123.22
|
|
WH/TL-EHE-350
|
Pool Water Heater 350KBTU/H
Hi-Efficiency
|
$4557.14
|
3873.57
|
3417.86
|
Commerical Pool
Heaters
available. Call for price & availability.
|
| ELECTRASTAR
Electric Spa Heaters with flow rate of up to 100 gpm, may be directly
plumbed
with PVC or metal pipe. UL listed. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
WH/TL-TE55
|
Electra 11, 20.5 KBTU/H
5.5Kw/Hr.
|
$442.86
|
376.43
|
332.15
|
|
WH/TL-TE110
|
Electra 11, 39.3 KBTU/H
11Kw/Hr.
|
$492.86
|
418.93
|
369.65
|
|
Draft Hood and Vent Cap
Kits for
Teledyne Series 2 & Laars Lite Heaters
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
WH/TL-D125
|
Draft Hood 125 indoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-D175
|
Draft Hood 175 indoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-D250
|
Draft Hood 250 indoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-D325
|
Draft Hood 325 indoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-D400
|
Draft Hood 400 indoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-V125
|
Vent Cap 125 outdoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-V175
|
Vent Cap 175 outdoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-V250
|
Vent Cap 250 outdoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-V325
|
Vent Cap 325 outdoor
|
$42.86
|
36.43
|
32.15
|
|
WH/TL-V400
|
Vent Cap 400 outdoor
|
$42.86
|
36.43
|
32.15
|
|
Air Vents
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
VR/WA-36.5A
|
Vacuum Relief Brass 1/2"
|
$24.29
|
20.65
|
18.22
|
|
VR/WA-36.75A
|
Vacuum Relief Brass 3/4"
|
$30.71
|
26.10
|
23.03
|
|
AV/AM-700
|
Air Vent 45 PSI 1/8" M Brass
|
$11.43
|
9.72
|
8.57
|
|
VR/CB-37-201-B1
|
Vacuum Relief Brass 1/2"
|
$21.43
|
18.22
|
16.07
|
|
VR/CB-37-202-01
|
Vacuum Relief Brass 3/4"
|
$24.29
|
20.65
|
18.22
|
|
Ball Valves
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
BV/SP-2622-020
|
Ball Valve PVC 2" Full Port
|
$22.86
|
19.43
|
17.15
|
|
BV/SP-2132-015
|
Ball Valve PVC 1 1/2" Compact
|
$33.93
|
28.84
|
25.45
|
|
BV/SP-2132-020
|
Ball Valve PVC 2" Compact
|
$48.57
|
41.28
|
36.43
|
|
BV/SP-2432-015G
|
Ball Valve PVC 1 1/2" Single
Entry
Gray
|
$28.57
|
24.28
|
21.43
|
|
BV/SP-2432-020G
|
Ball Valve PVC 2" Single
Entry
Gray
|
$41.43
|
35.22
|
31.07
|
|
BV/JY-6954
|
Ball Valve PVC 1.5"
|
$11.43
|
9.72
|
8.57
|
|
BY/JY-6956
|
Ball Valve PVC 2"
|
$14.50
|
12.33
|
10.88
|
|
Check Valves
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
CV/FC-1011-15
|
Check Valve Spring PVC 1 1/2"
S (White)
|
$12.86
|
10.93
|
9.65
|
|
CV/FC-1011-15
|
Check Valve Spring PVC 1 1/2"
S (Clear)
|
$17.14
|
14.57
|
12.86
|
|
CV/FC-1011-20
|
Check Valve Spring PVC 2" S
(White)
|
$18.57
|
15.78
|
13.93
|
|
CV/FC-1011-20
|
Check Valve Spring PVC 2" S
(Clear)
|
$22.86
|
19.43
|
17.15
|
|
CV/FC-1700-15
|
Check Valve Spring PVC 1 1/2"
Union (Clear)
|
$20.36
|
17.31
|
15.27
|
|
CV/FC-1700-20
|
Check Valve Spring PVC 2"
Union (Clear)
|
$26.43
|
22.47
|
19.82
|
|
CV/FC-1520-15
|
Check Valve Swing PVC 1 1/2" S
(White)
|
$10.71
|
9.10
|
8.03
|
|
CV/FC-1520-15
|
Check Valve Swing PVC 1 1/2" S
(Clear)
|
$15.00
|
12.75
|
11.25
|
|
CV/FC-1520-20
|
Check Valve Swing PVC 2" S
(White)
|
$16.43
|
13.97
|
12.32
|
|
CV/FC-1520-20
|
Check Valve Swing PVC 2" S
(Clear)
|
$21.79
|
18.52
|
16.35
|
|
CV/FC-1720-15
|
Check Valve Swing Union 1 1/2"
(Clear)
|
$17.36
|
14.76
|
13.02
|
|
CV/FC-1720-20
|
Check Valve Swing Union 2"
(Clear)
|
$24.29
|
20.65
|
18.22
|
|
CV/JY-7235
|
Check Valve Swing Clear 1-
1/2"
/2" (Clear)
|
$30.71
|
26.10
|
23.03
|
|
CV/JY-7305
|
Check Valve Swing Clear
2"/2-1/2" (Clear)
|
$32.14
|
27.32
|
24.11
|
|
Band Seal Couplings
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
BS/MR-CK115
|
Band Seal Coupling 1 1/2" CXP
|
$9.29
|
7.90
|
6.97
|
|
BS/MR-CK215
|
Band Seal Coupling 1 1/2" C X
2"P
|
$9.29
|
7.90
|
6.97
|
|
BS/MR-CP150
|
Band Seal Coupling 1 1/2" PXP
|
$5.71
|
4.85
|
4.28
|
|
BS/MR-CP200
|
Band Seal Coupling 2" PXP
|
$5.71
|
4.85
|
4.28
|
|
BS/MR-K150
|
Band Seal Coupling 1 1/2" CXC
|
$9.29
|
7.90
|
6.97
|
|
BS/MR-P100
|
Band Seal Coupling 1 1/4" CXC
|
$10.71
|
9.10
|
8.03
|
|
Thermometers
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
TM/IE-TD6
|
Thrmmtr LCD 6-Station Sensing
w/Memory
|
$171.43
|
145.72
|
128.57
|
|
TM/LE-SL1
|
Thrmmtr Dial 30-130F 1/2"MPT
|
$28.93
|
24.59
|
21.70
|
|
Flowmeters
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
FM/BL-CF30150PR
|
Flow Meter Lo Temp 1 1/2"P
8-30
gpm
|
$55.71
|
47.35
|
71.78
|
|
FM/BL-CF30150T
|
Flow Meter Lo Temp 1 1/2"C
20-100
gpm
|
$55.71
|
47.35
|
71.78
|
|
FM/BL-CF30200PR
|
Flow Meter Lo Temp 2" P 15-70
gpm
|
$60.00
|
51.00
|
45.00
|
|
FM/BL-CF30200T
|
Flow Meter Lo Temp 2" C
40-150
gpm
|
$60.00
|
51.00
|
45.00
|
|
Heat Exchangers
| ALFA-LAVAL Stainless
Steel Brazed Plate Heat Exchangers. Max working temperature 365', max
pressure 435 psi. Heat transfer coefficient 900-1400 BTU per sq. ft. of
surface, per
hour per F temp. diff. Connections 3/4, 1 " NPT. Can be used for heat
exchange
between Liquid/Liquid, Gas/Gas, or Liquid/Gas. |
|
Model No.
|
Description
|
Price
|
Qty 2-5 ea.
|
Qty 6-up ea.
|
|
HX/AL-CB14-14
|
Heat Exchanger SS up to 20
gpm
36 KBTU/H 3/4"
|
$375.00
|
318.75
|
281.25
|
|
HX/AL-CB26-18
|
Heat Exchanger SS up to 44
gpm
136KBTU/H 1"
|
$547.50
|
465.38
|
410.63
|
|
CI Solar Supplies Co
PO Box 2805,
Chino, CA 91710 (909) 628-6440
jclothi@attglobal.net