| Rutland Windchargers | CI Solar Supplies Co
On-Line Catalog |
| The Rutland 500
A completely unique mini windcharger designed with the weekend yachtsman in mind. This unit is rated at 1.5 Amps in a 20 MPH wind speed. The Rutland 500 is ideal for trickle charging batteries onboard vessels less that 10m in length with battery banks of up to 100Ah. |
 |
||||||||||
|
 |
|
The Rutland, 913 Model WG 913 Rutland Windcharger 3 phase 12 or 24 volt windcharger has a high inertia generator which accumulates more energy in real wind conditions than any other comparable wind generator available, owing to its continuous rotation between gusts of wind and its enviable low wind speed start-up. Designed for both land and marine applications the WG 913 is the newest windcharger in the Rutland range. For a sail boat application it can also be supplied with its own polished stainless steel mounting pole. Output will start at the low wind speed of 4 MPH. At a 10 MPH wind speed output will be 2 Amps at 12 volts, 4 Amps at a 15 MPH wind speed, 7.5 Amps at a 22 MPH wind speed and as winds become even stronger output will continue to increase. Most wind speeds are at the lower end of the wind scale, therefore the ability of the Rutland Windcharger to deliver power at low wind speeds but also to survive severe gale force winds are very inportant points to consider when buying a windcharger. |
 |
|||||||||||||||
|
 |
| The Rutland 910 Furlmatic
Model FM 910-3 Rutland Windcharger 3 phase 12 or 24 volt windcharger has the same high inertia generator as the WG 913 model, but because of its unique tail fin design the FM 910-3 windcharger will furl out of the wind if wind speeds exceed 36 MPH. This unit is recommended for use at remote sites where the wind regime is severe and because of its remoteness the site is rarely visited. The FM 910-3 in effect looks after itself. |
 |
|||||||||||||||
|
The Rutland 1803 Furlmatic This latest
Rutlang wind gen produces 340Watts at 22mph (10m/sec). Startup is 6mph
(3m/sec). Standard voltage is 12 or 24V DC, but 36 and 48 are available.
Towertop weight is 39kg. Turbine diamewter is 1.8m. Mounts on tower mast
with 3.2 in.inside diameter. Charge controller is included.
 |
 |
|||||||||||||||
|
 |
| ABOUT RATINGS - - Whoa! Whats going on? Why are Rutland windgen power ratings lower than others? Because they are made in England where rating is more conservative than in USA. Actually, for a given blade diameter there is little difference in actual, on-the-site power output among the various manufacturers. Rutland measures power based on nearby, undisturbed wind speed; many other mfrs use instantaneous (gust) power, considered less realistic by some wind pros. |
| Rutland Wind/Solar Regulator
Charge Controllers These are shunt-type regulators for home or marine application. Required to ensure that battery is not overcharged. Include blocking diode. |
 |
||||||||||||||||||||||||||||||||||||
|
| Rutland Wind/Solar Regulator
Charge Controllers - -Enclosed These are shunt-type regulators for home or marine application. Include ammeter, LED battery state indicator, fuse, and blocking diode. RWS200 also has dual-bank battery selector switch. |
 |
||||||||||||||||||||||||||||||
|
| Rutland Mounting Poles and Kits For marine installations, or home use. Include all hardware and predrilled, but guy wires/stays are supplied by user. Includes deck plates, guy brackets, tube joiner, screws, etc. | ||||||||||||||||||||||||||
|
| Rutland Repair Parts Parts for 910 and 913 | |||||||||||||||||||||||||||||||
|